Mid-volume UV flatbed printer
4-channel piezoelectric inkjet system with one 636-nozzle, variable droplet printhead per channel.
piezoelectric inkjet system with variable droplet printheads
Variable droplet sizes from 6 to 42 picolitres. The ability to vary the drop size to 6 picolitres produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picolitres produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1,440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
IJC255 or IJC257 UV-curable inks packed in quick-change, 800 ml / 2 litre bags in: Black, Cyan, Magenta and Yellow.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing
308 x 250 cm (320 x N cm permitted w/308 cm vacuum)
Up to: 309 x 251 cm (321 x N cm permitted w/308 cm vacuum) (for edge-to-edge printing)
Up to 34 kg/m²
90 to 220 cm, Up to 50 kg (at any width), Maximum diameter: 240 mm, Core: 3 inches (inside), Bias: Print-side-in or print-side-out, Most types (application dependent)
5 pneumatic operated pins per vaccum zone / 10 pins total
60 x 80 cm (min) to 305 x 250 cm (max)
±0.8 mm max error, measured over 2.5 m
±1.0 mm max error, measured over 3.08 m
0.7 mm max error, measured over 2.5 m
0.7 mm max error, measured over 3.08 m
1.0 mm max error, measured over 3.08 x 2.5 m
±0.6 mm max error, measured over 2.19 m
±1.5 mm max error, measured over 2.0 m
0.7 mm max error, measured over 2.19 m
2.0 mm max error, measured over 2.0 m
2.5 mm max error, measured over 2.0 m x 2.19 m
ONYX® Thrive™ 12 (421 configuration or greater recommended)
ONYX® ProductionHouse™ 12 (available, not recommended)
2 X 200-240 VAC, 50/60 Hz, Single-phase, Rated Current: 16A, Circuit Breakers: Europe: 16A, ROW: See CB Scheme Report
Clean, dry, compressed air using a Coalescing Filter, Pressure Regulator set to 690 kPa (100 psi) and 6 mm outside diameter air tubing. Peak flow: 56 l/min at 690 kPa
Temperature: 18˚ to 30˚ C
Relative humidity: 30 to 70% (non-condensing)
Ventilation: 1,200 m³ per hour minimum (see Site Preparation Guide)
2,750 m maximum, however some components specify a limit of 2,000 m
Printer only: 4.66 m x 3.83 m, 1,625 kg
Printer + Roll Media Option: 4.66 m x 4.12 m, 1,800 kg
Table height: 0.88 m / Overall height: 1.3 m
Visit our online guide to find the right media for your printer and application, including matching color profiles
Add 2 or 4 ink channels to the printer at any time
Add a Roll Media Option to the printer at any time
Add a Static Suppression Kit to the printer at any time
Add an Automatic Printhead Maintenance System to the printer at any time
Application of the 2-Channel Upgrade converts an Arizona
1240 XT to Arizona 1260 XT (adding White ink and/or
Varnish capacity for backlit and non-white media applications) or
Arizona 1260 L XT (adding Light Cyan and Light Magenta for
near photo quality and fine-art printing) .
Application of the 2 x 2-Channel Upgrade converts an Arizona 1240 XT to Arizona 1280 XT (adding White ink and/or Varnish capacity for backlit and non-white media applications and adding Light Cyan and Light Magenta for near photo quality and fine-art printing).
Adding the APMS (Automatic Printhead Maintenance System) to the printer enables quick, reliable and hands-free cleaning of a single colour in less than 25 sec or all colours in 2 to 4 min (depends on the printer version).